1 3/4 Stainless Steel Ring Shank Nails

Degree Stainless Steel Ring Shank Coil Siding Nails

Smooth Shank

Smooth shank nails are the most common and are often used for framing and general construction applications. They offer enough holding power for most everyday use.

Ring Shank

Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.

Screw Shank

A screw shank nail is generally used in hard woods to prevent the wood from splitting while the fastener is being driven. The fastener spins while being driven which creates a tight groove that makes the fastener less likely to back out.

Annular Thread Shank

Annular thread is very similar to a ring shank except the rings are externally beveled which presses against the wood or sheet rock to prevent the fastener from backing out.

Bright Finish

Hot Dip Galvanized

Electro Galvanized

Stainless Steel

D 304 Stainless Ring Cedar & Redwood Siding Nails

These Siding nails are 1 3/4″ length made of .083″ RING shank 304 Grade Stainless Steel. Use 304 Grade Stainless Steel for outdoor applications to avoid nail corrosion and discoloration. Recommended for ACQ treated lumber, cedar and redwood. Slender Annular Ring shank increases pull out resistance resulting in superior holding power providing a secure attachment which helps reduce cupping. The smaller 5/32″ diameter head works well with SIDING and allows nail to be countersunk or driven flush without crushing surrounding wood. Checker pattern on heads blends with wood grain, reduces glare from sunlight and accepts surface finishes. Slender shanks minimize splitting. Total 25 pounds. Approximately 350 nails per pound.Applications Include:Cedar, Redwood, and Cypress Wood Siding, also Fiber Cement Siding. Approved for use with ACQ treated lumber.

Products Related To This Item

• About Us

© 2002 – 2022 Hardware and Tools Corp. All Rights Reserved. Accessibility | Privacy Policy | Terms of Sale | Terms of Use

Some manufacturers place restrictions on how our prices may be communicated. We have the legal right to set our own prices independently.

Because our price on this item is lower than the manufacturer’s suggested retail price, the manufacturer does not allow us to show you our price without further action. You may either login with your account to see the price or place the item in your shopping cart.

These steps allow us to show you our price consistent with our goal of offering the lowest price on a wide selection of hardware products.

Read Also: How To Get Nail Polish Out Of Your Clothes

Stainless Steel Annular Ring Shank Nails

• These Are Excellent To Use With The Acq Lumber.
• The Annular Ring Threads Provide Maximum Pull-Out Resistance, Preclude Nail-Head Popping.
• Allows the Wood to “Surround” the Threads, Creating Better Strength.
• Checkered Flat Head, Diamond Point. Larger Shank Diameter Easily Penetrates Both Green and Pressure-Treated Pine.
• 316 Stainless Steel Ring Shank Nails, Stainless Steel Common Ring Shank Nails, Ring Shank Nails 316 Stainless Steel.

Degree Stainless Steel Ring Shank Coil Siding Nails 1

• Model:1-3/4 In. X 0.092 In.
• Brand:

• Manufactured with type 304 Stainless Steel.

• Stainless Steel assures longer fastener life, especially if the nail heads will be left exposed to the weather.

• Siding nails for extreme climates and cedar applications.

• 2 in. to 2-3/16 in. nails recommended for installing fiber cement siding.

• 304 stainless steel prevents corrosion and bleeding in cedar.

• Full Round Head.

Don’t Miss: How To Nail Hardie Board