Friday, May 24, 2024
HomeEditor PicksWhat Kind Of Nails To Use For Cedar Siding

What Kind Of Nails To Use For Cedar Siding

Outdoor Nails And Screws

FAQ : What Nails Do I Use On Real Cedar Siding? –

Nails and screws that are for use outdoors must be able to withstand rain, snow, heat and cold.

  • Stainless steel and aluminum fasteners repel rust and last for long periods of time.
  • There are two types of stainless steel fasteners available, 304 and 316. 316 should be used in moist and humid climates, while 304 works best in dry climates.

Which Types Of Nails Are Best For Cedar Shingles

It’s essential to consider the size and type of nails when installing cedar shingles. The right fasteners can ensure longer-lasting cedar shingles or shakes. The distance the nails are driven also makes a difference, as forcing them too deep could cause splitting in the wood. To avoid underdriving and overdriving the nails, all fasteners used to secure cedar roofing should be flush with the surface of each Certi-label shake or shingle.

How Are Cedar Shakes Installed

Homeowners usually install cedar shakes either all at once, or in layers to make some sort of pattern. To encourage a longer life, the wood must be treated prior to installation, and checked and replaced when necessary. This is most often done at the factory for the benefit of customers who are interested in a rustic look meant to last.

Also Check: How To Remove Nail Polish

Nail Reccomendations For Cedar Siding


I will be installing 3/4 cedar siding this weekend .

THis will be my first time, so I would love a few pointers to get me on the right path.

A few questions I have

1) Whats the reccomended nail? I know that it needs to penetrate 1 1/2 into the stud. I will be needing 3 1/2 nails to do so. My local hardware store does not sell 3 1/2 ring shanked so will I be ok with regular 3 1/2 siding nails?

2) Is hot dipped galvanized the way to go?

3) Is it best to avoid nail guns ?

4) If you have any other general tips for me that would be great!

Type Size And Spacing

Siding with Cedar Shingles, Images 13

For best results use splitless siding nails. These have thin shanks and blunt points to reduce splitting. For greater holding power, nails with ring threaded or spiral threaded shanks are recommended. Nails with textured heads can be used to reduce glossy spots at the nails when finishing .

Nails should be driven with care. Heavy nailing distorts the wood and may cause splitting. At mitered corners, near edges and near ends, nail holes may need to be pre-drilled to avoid splitting.The size of the nails to use depends on the type and thickness of siding. Good building practice is to use nails long enough to go through underlying materials, such as sheathing and insulation, and penetrate at least 1-1/4 . See table below for recommended nail lengths for various thicknesses of siding.Siding should be fastened to each stud or furring strip with nails spaced at a maximum of 24 on center, nail placement depends on the siding pattern and width. The key is to fasten the siding securely without preventing it from moving in response to the moisture content of the air. In general, each piece of siding must be nailed independently.

Important: Nailing overlapping pieces together restricts the natural movement of each piece and will cause splitting.

Also Check: Where Can I Buy Revlon Nail Polish

What Nails Are Best

The type of nails you choose to use when installing cedar shake siding should be considered also. The right nails play an important role in ensuring that your cedar wood siding endures for a long time. Ideal nails to use on cedar wood are made from aluminum, double-dipped galvanized, or stainless steel. Other types of nails such as plain steel nails are not advisable because reactions between the nails and the siding and the environment will create ugly stains on your siding over time. Take care not to drive nails too deep into your shakes as this might cause your cedar shake to split.

When To Use A Framing Nailer For Fencing

A framing gun carries the day for fencing work if youre fastening boards or wood planks to wooden posts.

This includes projects involving building privacy fences, picket fences, pet fences, post/rail fences, etc.

Side Note: In general, youll require a framing mailer that shoots 2 to 31/2 length nails for this job.

Read Also: How To Nail Hardwood Flooring

What Kind Of Nails Do You Use On Cedar Siding

4.2/5Stainless Steelstainless steelthis is here

For siding up to 6 inches wide, use one nail one inch up from the lap. Face nail with two nails per piece for 8 inches patterns and wider, keeping nails 2 ½ to 3 inches apart to allow for dimensional movement without splitting. For vertical applications, siding should be nailed to horizontal blocking or furring strips.

Furthermore, what nails should I use for wood siding? Hot-dipped galvanized nails are suitable, but stainless steel or high-tensile aluminum ones are better. The nails should have ring or spiral shanks; smooth-shank nails tend to pop out.

Also to know, what kind of nails do you use for cedar shingles?

Nails / Staples:Use rust-resistant shingle nails or staples 1-1/4″ to 1-1/2″ long, galvanized, in aluminum or stainless steel. Use 2 nails per shingle at about 3/4″ from each edge, and 1″ above the butt line of the overlapping shingle.

Can finish nails be used for siding?

The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. While it’s recommended to always use a siding nail gun for siding installation, in a pinch, you may be able to use a framing nailer instead.

Benefits Of Cedar Shake Siding

Wood Siding And Brad Nailing Tips – House Construction

Cedar shake siding has been a firm fixture in construction history, and has experienced waves of popularity throughout the years. Cedar shake siding is a great addition to your home because it provides an extra level of protection against the elements as well as natural insulating qualities. Add that to the fact that cedar is a very durable natural material, known for its longevity. With proper maintenance, cedar shake siding can last for a lifetime.

;to take a look at our online selection of sturdy wood siding. Discover the right look for your home.

You May Like: What Is The Best Sally Hansen Nail Strengthener

What’s The Best Fastener For Cedar Decking

When it comes to decking applications, most people are going to use screws, ring shank nails, or spiral shank nails. With screws, theres less danger of the coating coming off when using the type with a head where the screw bit is not going to walk out of it.;

The underlying material of these screws is iron, and if the coating comes off by being hit with a hammer or because the bit comes out of the screw head, you wind up with iron coming in direct contact with the woodproducing bluish-black or black iron stains. The only way to remedy this is to remove the fastener, treat the stained area with a mild oxalic acid solution, and replace the fastener with one thats approved.

Stay tuned for more from Paul as we continue to learn from him on Dunn Solutions over the next few months. In the meantime, catch up on his previous posts:

Applying Siding Over Rigid Foam Sheathing

Rigid foam sheathing has an insulation value superior to that of traditional lumber and plywood sheathings. However, it has little or no nail holding power and using rigid foam sheathing as a nailing base for cedar siding is not recommended. For best results with rigid foam and other sheathing products, follow the nailing recommendations as to nail type, positioning, penetration and spacing. The table below provides nail length recommendations for siding and foam sheathing systems.

Foam sheathing panels vary in moisture permeability but are generally considered as good moisture barriers. They should be used with a continuous film vapour retarder on the inside wall under the interior finish or with foil-backed gypsum board. Rigid foam sheathing can cause moisture to accumulate on the back of siding and cause staining, buckling and damage to finish coats. The following recommendations are meant to minimize potential problems when Cedar sidings are applied over rigid foam sheathing:

Recommended Reading: How To Remove Gel Nail At Home

Can You Use Cedar Fence Boards For Siding

4.7/5You can use cedar boardssidingboardfull detail here

Use Hot-Dipped Galvanized, Aluminum or Stainless Steel. Hot-Dipped galvanized, aluminum and stainless steel nails are all corrosion-resistant and all can be used to nail Western Red Cedar.

Furthermore, how much do cedar fence boards cost? Cedar fencing costs on average $7 to $12.00 per linear ft to be installed on your property. Cedar fencing is more expensive than Vinyl fencing and slightly more than a typical board on board fence. Installation cost is highly dependent on property conditions. Cedar material cost $18 to $35.00 per linear ft.

Besides, what is the best wood to use for fencing?

The most popular woods used for fencing are pine and cedar, though cypress and redwood are also good options.

  • Pine wood is common because of its relatively inexpensive cost and longevity.
  • Cedar doesn’t require much maintenance and the wood contains natural insect-repelling substances.

Should you caulk cedar siding?

NOTE: Generally, we do not recommend caulking butt-joints on cedar siding. Natural siding boards are designed to expand and contract with the elements and we do not want any adhesive to prevent their natural movement. Fiber cement boards are caulked only when there is no metal flashing behind them.

siding shouldoverlapSiding

Cedar Siding: Nails Or Screws

Cedar Clapboard Siding Cost Guide

the 1/2 x 10 cedar siding on my house is quite loose from years of neglect . i think the big reason much of it has;wriggled loose;is that many of the nails never sank into anything other than the sheathing . as im prepping for painting, im going through all of the loose pieces and wanting, of course, to fasten them securely to the house. i was told by a supposedly reliable source that i should remove all the nails and fasten with screws instead.; it was recommended that i put a 1/4 lag into the siding for the screw head, so as not to crack the thin and old siding. ive been doing some research on siding repairs and havent come across one reference to using screws, so im wondering if there is a very good reason NOT to use screws, other than possibly cost. thanks.

  • |#1

    You could make repairs like that using 1-1/4″ stainless steel trim head screws. Remove the nails if possible and try putting the screws in the same holes. Seat the screws so that the head are just flush with the wood, or very slightly recessed, not much. You may find that the nail hole prevents the siding from splitting, and that the threads grab into the plywood well enough to pull the siding down.

    All siding wants to lift away from the house. It’s got more dampness on the back than the front, and it gets baked by the sun on the front only. Sometimes it will pull away even;in spite;of;large siding nails that are into the studs.

  • You May Like: How To Cure Peeling Nails

    How Do You Install Cedar Wood Siding

    How do you install cedar wood siding? Bevel siding should be face nailed to studs with 1-1/4 inch penetration into solid wood using one nail per piece spaced at a maximum of 24 inches on center. Place nail just above the overlap. Take care not to nail through the overlap of two pieces.

    What do you put behind cedar siding?;A vapor barrier is also recommended with cedar siding. The Dupont Tyvek DrainWrap is a quality barrier with built-in channels to channel away excess water. Regardless of new or remodeling installation, Dupont Tyvek DrainWrap weather-resistant barrier is recommended before installation of the cedar siding.

    How much do you overlap wood siding?;Siding is applied in overlapping horizontal boards ranging from 4 to 12 inches in width including an overlap of ½ to 2 inches.

    Does cedar siding need to be caulked?;Generally, you dont need to caulk cedar siding that has been installed within the last 10-15 years. However, sometimes poor workmanship on a building could result in you having to caulk siding and joints. And other times, old cedar siding will simply need a bit of upkeep.

    Best Practices For Installing Wrc

    Installation involves many processes including inspection, storage, fasteners, nailing patterns and placement, and flashing installation.

    Inspecting and Storing Materials

    As soon a shipment is received, inspect all materials to ensure the proper grade of material for the project. If any of the materials appear damaged in any way, they should not be installed.

    Prior to installation, it is important to acclimatize the materials. Since WRC is a natural material, it responds to the environment around it. Cedar siding can swell or shrink as it gains or loses moisture to reach equilibrium with the moisture content of the surrounding air. On the job site, ensure that all WRC siding is protected from direct sunlight, water saturation, snow, ice, dirt, and other elements. Store the siding flat and off the ground on a vapor barrier so that moisture is not absorbed from the lower boards. While it is important to cover the materials, do not completely seal them, as good air circulation is required. Ideal moisture content for installing WRC is an average of 12 percent MC in most areas in North America.

    Determining Hardware

    Next, decide which fasteners to use so that the product is properly secured to the building frame and to ensure a durable and long-lasting result. There are various types of appropriate fasteners on the market. Lets discuss a few options as well as nailing patterns.


    Proper Nailing Techniques

    Wall Construction

    Installing Flashing

    Read Also: Does Vinegar Kill Nail Fungus

    Dos And Donts For Outdoor Nail Use

    Stainless steel siding nails wont corrode when exposed to weather.

    When the sky turns blue, its tempting to grab a handful of nails and tackle those outdoor repair jobs that have languished during the cold weatherbe they loose soffit boards where squirrels invaded the attic or buckled siding thats ready for repainting. Dont just grab any nail, though, even if you expect it will never see rain. All steel nails exposed to moisture eventually rust. Paint wont prevent rust either; in a couple of years the rusty nail head will bleed through the topcoat.

    If youre planning outdoor repair jobs, or the construction of new steps, porches, and fencing, start by buying a box of galvanized, aluminum, or stainless steel nails.

    Can You Use A Brad Nailer For Shingles

    Preferred Nail Type & Spacing for Cedar Fencing

    Large-body nailers typically include framing nailers and roofing nailers. These nailers are used for more technical projects such as framing out a basement or installing roofing shingles. For woodworking projects, a brad nailer is a good choice. If you re constructing a fence, a framing nailer is a good option.

    Recommended Reading: How Do You Get Gel Nails Off At Home

    What Nails Do I Use For Cedar Shingles

    NailsUseshingle nailsUsenailsshingleshingle

    Ideal nails to use on cedar wood are made from aluminum, double-dipped galvanized, or stainless steel. Other types of nails such as plain steel nails are not advisable because reactions between the nails and the siding and the environment will create ugly stains on your siding over time.

    Furthermore, what is the minimum pitch for cedar shingles? The minimum roof pitch for shingles and shakes is 14 degrees. At these low pitches , care must be taken and a water impermeable, vapour permeable underlay MUST be used underneath, with a ventilated space between the membrane and the shingles.

    Besides, what goes under cedar shingles?

    The order is: sheathing, pink paper, black paper, pink, black, shingles. There is no lath; the shingles are right against the black paper. There is no evidence of water damage to the sheathing, but there are countless layers of paint on the shingles too .

    Do you nail or staple shingles?

    Fasteners for asphalt shingles should be roofing nails or staples. The head of a roofing nail or the crown of a staple is what actually holds a shingle in place. If staples are properly installed, they offer nearly the same wind resistance as nails. The problem with staples is the orientation of the staple crown.

    Best Pneumatic Nailer For Cedar Shingles

    Bostich N66C has a handy adjustable depth setting..once set, there are no issues splitting or marring shingles.

    This works great- its beyond doubt the most impressive of the lot.

    It feels super solid, its superbly built, and nicely balanced.

    There are absolutely no problems fastening cedar shingles here- No jamming. No double kisses. No marring/cracking shingles.

    The depth adjustment is straightforward, nail loading is easy-peasy, and includes a welcome hook .

    You can select rapid bump fire or sequential fire .

    Be sure to adjust the nail depth and air pressure beforehand- youll be flying once you get it right.

    Read Also: How Much Do Nails Cost

    Correct Nails For Cedar Shingles

    The ideal nail types for cedar shingle roofing projects include corrosion-resistant varieties like stainless steel and hot-dipped galvanized. At Cedar Roof Coatings, we advise against the use of plain steel nails to keep the cedar roofing stain-free over time. Plain steel nails and copper nails can react adversely with the natural oils in cedar and can rust and disintegrate. We also caution against the use of electro-galvanized fasteners on any cedar shingle roofing project.

    When working in locations within 15 miles of salt water, always use stainless steel Type 316 nails. Outside of this zone, nails must be stainless steel, Type 304 or Type 316, or hot-dipped galvanized with a coating weight of ASTM A 153 Class D. While some nail manufacturers offer nails specifically for wood shake or shingle roof applications, always contact the manufacturer for more information. Fasteners used with preservative-treated and fire-retardant shingles or shakes must be stainless steel Type 316.


    Popular Articles