Monday, September 19, 2022
HomeNewsWhat Nails For Hardie Siding

What Nails For Hardie Siding

At A Glance Nail Gun For Hardie Siding

Rusty nails hardie siding
Product
  • It works exceptionally well for wood and even lightweight aluminum.
  • The nailer has a dimension of 3.25 x 12 x 11.25 inches.
  • Adjustable exhaust allows you to direct the exhaust away from your project.
  • The tool is made from lightweight aluminum.
  • The total weight of the product is 4.7 pounds.

This nail gun is proof of why Bostitch is known for its products. The lightweight nailer is easy to carry around. BOSTITCH N66C Coil Siding Nailer ensures that you do not make any mistakes when you work with it. The soft rubber tip also ensures that your project is not damaged in any way.

Its flexibility is exemplified by the firing mechanism. There are two options for the trigger. The first mode is a traditional sequential mode and the second option is a rapid-fire mode. It also has a depth adjustment feature so that you can make sure you get the nail to the depth you desire.

A 350 nail magazine is included with the handy tool. This allows you to complete a large amount of work at once. It shoots coil nails with lengths ranging from 1- ½ inches to 2-½ inches at 70 to 120 pounds per square inch.

  • It has a tilt bottom magazine which ensures fast reloads.
  • You can easily switch between sequential and contact nailing.
  • It accommodates up to 300 nails.
  • The nailer got an award for the pro preferred nailer title.
  • Flipping a switch allows the user to switch between different modes.
    • Good option within a limited budget.
    • A belt hook helps with keeping the tool close to you.

The Lowdown On Clearances

Fiberboard cement siding is not bulletproofit will deteriorate if exposed to water for a long time. Its imperative that you honor the proper spacing between the siding and the roof surfaces and between the siding and the horizontal surfaces, such as the ground or cement slabs and decks. Check with your specific manufacturer before you start. Here are some general guidelines.

Leave:

Also Check: How To Remove Impress Stick On Nails

Can I Use Roofing Nails For Hardie Siding

You can shoot Hardie siding on with air powered nailers or use hand driven roofing nails to attach siding to the home or structure. The nails can be ringed- shanked or smooth just make sure you are hitting the studs in the wall. Our Crews prefer 1 3/4 smooth shank roofing nails for Hardie installation.

Read Also: Opi Fingernail Polish Retailers

Bostitch Coil Siding Nailer 1

Stanley- Bostitch produces first-class, innovative clipping tools for commercial, constructive, and home renovation tools. This Bostitch Coil Siding Nailer is a 15 Degree Coil Siding Nailer used for weld wires and plastic-inserted coil nails. This lightweight tool has an aluminum cover.

You can adjust the penetration of the nails. Due to the soft rubber foot, you can use it on a variety of siding materials. The Bostitch Coil Siding Nailer works with any air-hydraulics and has been mechanized in a way that the exhausted air will be deviated away from you while using it.

Pros

  • It can be used for well-wires and plastic-inserted coil nails
  • It has a soft rubber foot can be used in both hard and soft materials

Cons

This Bostitch Coil Siding Nailer has some of its inadequacy. A few of our customers claimed that they were a bit unsatisfied with its finishing. The reason is straight- the depth issue. One-fourth of the extensive nails were found to be not getting inside the wood completely until hammered. Whereas some had problems with controlling the power of the machine, other than that, its a good choice for your Hardie sidings.

Numax Sfr2190 Pneumatic Framing Nailer

Best Nails for Hardie Siding (A Comprehensive Guide ...

Design:

The light and robust magnesium housing, ergonomically secure grip make you feel comfortable while working. Also, it possesses a replaceable trigger for the quick-fire or single shot are all features of this pneumatic 21-degree nail. Its perfect for home renovation projects and professional builders. If you are a DIY enthusiast, this is a must-go product for you.

Value for money:

This nailer is more than just a framing nailer it offers many features in this price range. This cost-effective combination of speed and performance makes home improvement projects a success. One of the more appealing features is the partly magnesium construction, which provides an outstanding strength-to-weight ratio.

Its simple to change the depth. All you have to do is turn the spindle on the nail pins front. This is an unexpected bonus because some nails require special tools to change the depth.

Dual Trigger:

The dual trigger feature on the NuMax nail gun allows you to switch between sequential and burning fire, allowing you to execute a single trigger and continuous nailing depending on the situation. It does not have a selectable button like other current nailers, but beginners and advanced professionals should keep to sequential shutter mode for safety reasons. Switching to bump mode, on the other hand, is not an issue for a skilled framer.

Pros

  • The package doesnt include a storage case

Verdict:

Read Also: How To Take Your Contacts Out With Long Nails

Bostitch F21pl Round Head Nailer

Up next, the nailer we have on our list is from the well-reputed brand, Bostitch. Bostitch is one of the brands that come to most peoples minds when searching for a powerful nail gun. It is actually more like a two-in-one nailer as it can be used for two purposes.

The nose tip of the nailer can be changed. One is for a framing nailer, and the other is to perform like a metal connector. This feature makes it suitable for a lot of tasks. This is capable of performing some heavy-duty functions while being a lightweight tool. The nail gun is made of magnesium which makes it durable.

You will get two options for shooting nails. You can use the option for bump trigger or shooting. However, you can use 1.5 inches of plastic collated nails or 2.5 inches of metal collated nails with it. Suitable nails for this tool are 21 degree angled nails.

Some other features of the nail gun include depth control that makes it outstanding for many wooden works. Finally, storing this tool is also quite simple as you get to hang this tool in the workshop.

How Long Will An Avocado Seed Last

Its helpful to use a clear glass so you can easily see when roots start to grow. Many guides say sprouting can take anywhere from 2-4 weeks, but in my experience, it usually takes at least 8 weeks to get a sprout, you can leave the pit out aslong as it doesnt dry out to much, you must keep the conditions right.

Don’t Miss: How To Remove Nail Glue From Wood

Paslode Hardienails: No Studs Required

Will a new siding fastener transform fiber cement siding installation?

In partnership with Paslode, James Hardie Building Products created HardieNails, a patented 1-1/8 long fastener that attaches siding without the need to hit a stud. The manufacturers have designed a nail thats shorter but stronger, so it doesnt need to be driven as deeply.

So, how does it work?

Does Hardiplank Expand And Contract

How to Nail HardiePlank® Lap Siding

This is because water is the enemy of fiber cement. Then James Hardie realized that the fiber cement would expand and contract with temperature changes differently than the caulking, and this caused constant maintenance in order to keep water from infiltrating the siding and causing deterioration and mold issues.

You May Like: How To Treat Toenail Fungus With Vicks

What Kind Of Nailer Do You Use For Hardie Siding

A nail gun will be your best friend in accomplishing your siding projects. It will not only save you loads of time it will give you relief from having to pound away with a hammer for hours. So, what kind of nailer do you use for hardie siding? This is probably the first question you have if youre about to undertake a large siding project!

Since you have to deal with nails on a hardie siding project, you must choose the ideal nail gun. But, without having adequate experience, you may struggle to find the appropriate nailer for your project. So, to make things as easy as possible, weve laid out all the important information you must know before undertaking such a tedious task.

Keep reading to find out more!

Read Also: Where To Buy Gel Nail Polish Online

How To Choose Nails For Hardiplank

Hardiplank fiber cement siding can enhance the beauty of any home, but if the installer uses the wrong nails it will ruin the exterior look of your home with potential rust stains especially in humid climates.

If a homeowner intends to install his own siding, the importance of using the correct nails can not be expressed enough. With the use of the correct nails, the finished product will be a home with a low-maintenance exterior to be proud of for years to come. Finding the right nails is not difficult if you know what you need.

Recommended Reading: Vick Vaporub For Nail Fungus

How Do You Fasten Hardie Board

Nailing Basics

  • Use 6d or 8d galvanized or stainless siding nails and install a single nail about 1-in.
  • Dont drive nails into the siding at an angle.
  • Fastener heads should be snugged up against the siding, not driven into the surface.
  • The end of each plank making up a butt joint needs to be fastened to a stud.
  • Metabo Hpt Coil Siding Nailerz

    Maze Nails 6

    Easy and convenient:

    Metabo HPT is a kind of nail we recommend in a hurry. By rotating the tool sideways, you might fill the nail magazine. Youve got your instrument ready. Thats all. Use the instrument with all kinds of nails. This device is compatible with both lateral nails and plastic nails for your convenience.

    Powerful tool:

    This nail gun could be employed when using nailers 1 to 2 length if you are looking for powerful pneumatic side nails. You will not be deceived by the Metabo HPT product, which stands for Metabo Hitachi Power Tools. They can be wire clots or plastic clots according to your requirements.

    A lot of features in a reasonable price tag:

    It has a guarantee of 5 years. Indeed, from this pneumatic facade nailer, you can expect excellent construction quality. And as this is an air nailer, the air compressor must be connected for use. The air stress may be readily operated between 70 PSI and 120 PSI. This side nailer features a magazine on the bottom to reload quickly and easily with lateral clots.

    Pros

    • Can jam frequently

    Verdict:

    Metabo HPT cant be neglected when looking for a good siding nail gun for Hardie siding. Although it jams nails often besides this, it offers a lot of mesmerizing features in such an excellent value for money. Dont miss the opportunity to invest in such a product that can help you in your professional works and projects.

    Read Also: How To Remove Dip Manicure

    What To Look For Buying The Right Nailer For Hardie Siding

    Installing Hardie siding can be pretty challenging. It will be best if it is installed by professionals. However, anyone who wants to do this needs to gather all the necessary tools. Having the right nail gun is the key here.

    Otherwise, the entire project will go in vain. Here, we have discussed some requirements that one should consider before purchasing a nail gun for nailing on James Hardie siding boards.

    Freeman P4fncb Pneumatic Finishing Stapler

    Design:

    All nails in the package are developed for rigorous manufacturing requirements. Every nail also includes an aluminum cylinder, which makes the nail inside the toolless wearable. You may also easily modify the length of your nail with adjustments on each nail according to your needs. A limited warranty of 7 years and a 90-day warranty for consumables is also provided with Freeman P4FRFNCB Combo.

    Quick Jam release:

    The included stacker is a perfect option if you are searching for a Decorative Finish. Moreover, the nail isnt stuck too often with this tool, which lowers downtimes considerably. Moreover, the fast clamp can ensure that the loosening of the fixed nail does not waste time. The nail depth can be easily adjusted to determine how long the nail will be sent.

    A great combo kit:

    Whats better than having a package of the Nailers at the same price you get just one nail gun? Yes, this is a combo kit of four versatile tools alongside a storage case in which you can easily carry all of them. This kit includes a cordless nail gun along with a brad, framing, and a finishing Nailer too. Do you want to work on the smaller projects as well? What if you get a staple gun with this kit too? This wholesome tool case can be an ideal go for everyones use whether. Its lighter-duty work or heavier.

    Pros

    • Slightly over-priced

    Verdict:

    Also Check: How To Hang A Calendar Without A Nail

    Can You Install Hardie Board In The Winter

    And while certain siding materials can have issues when they are installed in the winter, other siding such as fiber cement from The James Hardie Company® does fine in cold-weather installation when the manufacturers instructions are followed. And thats how our crews are trained spring, summer, fall, OR winter.

    Safety: Lets Talk About It

    How to Select Siding Nails

    Before you begin the HardiePlank® siding installation process, we need to talk about safety. Here are the safety precautions that are recommended for anyone who decides to install HardiePlank siding:

    • Always wear safety goggles or glasses when youre cutting and nailing fiber cement.
    • Wear an N-95 dust mask thats been approved by NIOSH when cutting the product.
    • Use ear protection if youre using a circular saw to cut the siding.
    • When using a circular saw, make sure you cut outside and use a dust-collecting saw. Circular saws create tons of dust, which can lead to health problems down the line.

    Heres what to remember about the storage and handling of fiber cement:

    • When it arrives, inspect it carefully to ensure theres no damage.
    • Make sure the product stays dry until its installed.
    • Prevent breaking by carrying pieces on the edge.
    • When cutting the product, support it along its length.

    Now lets begin the Hardie Board siding installation process.

    Read Also: Remove Contacts With Long Nails

    Best Nail Gun For Hardie Trim Review

    As Hardie trims are rigid materials, you will need a powerful siding nailer. Some nailers are suitable for light wooden works, like building a cabinet, but it takes more than that for Hardie trims. Here, we have cumulated our top five picks of nail guns suitable for using or installing Hardie Siding.

    Use The Right Nails For Fiber Cement Siding

    Using the wrong nails can have disastrous results product failure, voided material warranties, customer complaints, and a bad reputation. Use the right nails from get go. These Fiber-Cement Siding Nails are Designed expressly for applications of various lap and panel siding materials made of fiber-cement composites. Annular ring shank increases withdrawal resistance to provide a secure attachment. Choosing the right nail can help ensure product life span, maintain healthy relationships with manufacturer and client, all the while securing your good reputation.

    Fiber-Cement Siding Nails are available in only 316 Grade Stainless Steel:

    316 Grade Stainless Steel is best suited for tropical, seaside, salt water contact applications, or any project near large bodies of water. Recommended for all outdoor applications with ACQ-treated lumber, redwood, cedar, and acidic or oil-based exotic woods where Marine Grade fasteners are needed to avoid unsightly stains, streaks, corrosion and discoloration.

    For Wood Siding applications, check out our Hand Drive Siding Nails. Contact our experts here at FastenerUSA for assistance on choosing the right nail for your project.

    Don’t Miss: How To Take Off Acrylic Powder Nails

    Editors Pick Best Nailer For Hardie Siding Dewalt Dw66c

    Industrial and construction-related tool manufacturing company DEWALT has a wide range of nailers having specific purposes. Dewalt DW66C-1 is one of the best Hardie siding fasteners and has a reputation for quality Hardie siding works.

    It can receive 15-degree wire/plastic collated nails of length 1-1/4 to 2-1/2in with a diameter 080 to .092 in. This too has a sideway load-designed magazine that holds up to 300 nails at a time that promotes fast nailing.

    You should feel comfortable working with this tool because of complete Aluminium housing which reduces weight to only 4.8lbs. It has a rubber over-mold grip for increased comfort for your palm.

    This tool comes with a dual actuation mode which serves different purposes and is easily switchable. You can conveniently select the perfect depth for penetrating nails to the studs using the tool-less depth adjuster.

    Its size is small having dimensions of only 11*10.5*4.5 which allows you to work with it for a long time without fatigue. You will find no mark on the nailing spot because of its no-mar tip feature.

    Dewalt DW66C-1 specializes in Hardie siding, wood siding, cement siding along other heavy woodworks. It is compatible with all professional users and personal users for small projects and DIYs.

    Best 5 Nailers For Hardie Siding

    Problems With James Hardie Siding Installations

    Judging by the power of the tool, the demand of the project, buyers budget, and market value, 5 best siding nailers have been deliberated below-

    Also Check: Vicks Vaporub For Toe Fungus

    What Is The Best Way To Nail Hardie Board

    For Hardie siding, its recommended to use stainless steel or hot-dipped galvanized nails. You can either nail by hand or use a pneumatic nailer. However, its best to use a pneumatic nailer for speed and consistency. At the bottom, the siding should be face nailed, and at the top, it should be blind nailed.

    RELATED ARTICLES

    Popular Articles