Hanging Fairy Lights Without Nails
Hanging fairy lights without nails is a relatively painlessprocess.
Remember that small open loop hooks are excellent forceiling hanging. You can find damage-free loop hooks at your local Home Depotor Walmart.
Hanging fairy lights on brick? Hot glue can usually dothe trick. If you change your mind, the glue generally isnt difficult topeel off.
How To Hang String Lights On Wall
Now that you know how to hang string lights on your ceiling, lets take a look at how to hang them on your wall. Once again, its best to use adhesive hooks rather than nails. In a pinch, thumb tacks can be used for wall hanging. This way, you can avoid nails and the damage they can do to your walls. In using thumb tacks, look for flat headed ones. These wont protrude from the wall very much and come in all different colors. This means that you can mask them by choosing the same or similar color as your wall. Since a lot of string lights used are connected by intertwined wires, its easy to slip a pin between wires. Its crucial that you dont put a pin through a wire, however.
If youre hanging your lights across a window in the design you create, wire suckers are also useful. These attach to the window via a suction cup and have a groove to attach the wire in. This can help make sure your lights dont sag around or on windows in your wall.
Its also great if you can start close to an outlet. If you cant, though, dont worry because an extension cord can do the trick. Just like on the ceiling, you can clip the cord to the wall to avoid it distracting from your design.
Where To Hang String Lights
String lights can be placed virtually anywhere in the yard or around the property. Some ideas on where to hang string lights include:
- Between trees
- Around a tree trunk and into the branches
- Between walls
- On patio railings and balustrades
- Up pergola posts and across overhead beams
- Along a single wall, as a hanging grid or an overhead edging
- Installed on the permanent yard or patio posts
You May Like: How To Store Color Street Nails
How To Hang String Lights On Pergola
A pergola is a step between an uncovered and covered patio. These are the structures that cover usually a portion of the patio and have slats rather than full coverage. These slats could be side-by-side or create a grid-like pattern. Some homes do incorporate a cloth or canvas optional canopy to add extra protection from the sun during the day. They can either attach to the house or they can be free standing.
As with other structures weve looked at and will look at in this guide, you have plenty of options in the exact design. The most popular options are to run the lights either with or perpendicular to the slats. This is often chosen over choices such as zigzag patterns as it creates a cleaner look and avoids a clashing between the pergola design and the string lights.
Some homeowners may also choose to wrap string lights up the supports of their pergola. This is particularly favored when string lights arent permanent such as when Christmas lights are hung up. Its also a good way to disguise cords running up the pergola to power the lights.
Just like hanging string lights on a patio, coaxial staples are incredibly helpful here. They can be used both for pillars supporting the pergola and lights hung off the main body of the pergola as well.
S On How To Hang String Lights On A Stucco Wall
It very well may be baffling when its an ideal opportunity to hang the Christmas lights on your homes plaster outside. It would be best if you securely made sure about the lights without harming the completion of your home, and the harsh, lopsided surface of plaster makes most cements ineffectual.
In any case, proficient lighting originators have discovered a straightforward answer for tying downlights to this challenging surface. Utilizing a typical creating instrument, you can make sure about Christmas lights and eliminate them without harming the plaster.
Every year you own a plan that String Lights On A Stucco Wall establishment of light clasps may be a far superior choice. Likewise, this is the choice to utilize if your plaster finish is made with Exterior Insulation Finishing Systems or EIFS.
Don’t Miss: How Do I Get Nail Polish Out Of Clothes
How Do You Hang Lights On A Canopy
The lights should jump from wall to canopy at the narrowest possible gap. The lights will be fastened around the top of the canopy on the outside, so ensure you leave enough length on the string. Hanging lights on the wall behind the canopy offers a soft, subdued lighting effect visible from within the canopy.
How To Attach Light Strings With A Hot Glue Gun
Just like the clips, you need to measure the perimeter and unroll the light string. Also, inspect the string to ensure there is no missing or burned-out bulb.Apply a line of hot glue along the side of the first bulb socket, and hold the glued side of the socket against the overhang or wall. Hold it for few seconds to cool and set. Continue the process until all of the bulb sockets are glued in their positions. Use an outdoor extension cord so you can take the hot glue gun up the ladder.
Connect the light string into an outdoor socket apply a male outlet to one end and a female socket to the other end before you do it if you are using the type of cord that you cut to measure.You can bypass glues or adhesive by using gutter hooks to hang Christmas lights and other decorations.The adhesive is permanent, and removing the clips will be difficult. Nonetheless, clips can be used every year, and they enable the light strings to be removed easily.
Recommended Reading: Hongo Killer Nail Formula
Attaching String Lights On A Stucco Wall With A Hot Glue Gun
A. Measure the border you need to beautify with lights, such as your homes rooftop line, patio overhang, or around window outlines. Buy enough light strings to cover this separation serenely. Consider the shading design you intend to show, such as utilizing just one shading, exchanging two hues, or arbitrarily blending hues.
B. Purchase an adequate number of clasps to cover this separation with one clasp each 6 to 8 inches, contingent upon the kind of lights you will utilize. Bulb-type lights, known as C7 or C9 bulbs, use bigger clasps than scaled downlights or icicle lights.
Wrap Lights Around The Trunk Of A Tall Tree To Light It Without A Ladder
Use an extension cord to run the lights to the tree, and then wrap the lights around the tree trunk up until you reach the first branch, leaving 6 inches of space in between the strands of lights. Then, wrap the lights back down to the bottom of the trunk, passing through the middle of the space between the strands.
You May Like: How To Remove Contact Lenses With Nails
Other Tips For Hanging String Lights
- Take the glass bulbs out BEFORE hanging. You don’t want to deal with broken bulbs!
- If hanging your string lights on stucco, you will need to use wall anchors specific to stucco.
- Get an assistant to help. Even having one of your kiddos help out by handing you items can make this process go a lot quicker!
How To Hang Christmas Lights Outside Without Nails
Imagine Christmas time without the sparkling display of lights around your neighborhood. The season truly wouldn’t be the same without the glow of lights around businesses and homes in your area, would it? For some, hanging Christmas lights on your home may be an uphill task. This is especially so when you have no clue what you are doing! It does take practice and experience, both of which we have here at Go-Forth Pest Control.
Don’t Miss: What Can You Put On Nails To Make Them Stronger
Create An S Design Over The Front Of The Shrubs To Make A Random Pattern
Plug in a strand of mini-lights and start on the closest side of one bush. Snake the lights through the foliage in a winding shape from the bottom of the shrub to the top, only covering the front and some of the top of the shrub. This lighting technique gives the effect of randomly dispersed lights throughout the shrubs.
String Light Cord Isnt Long Enough
If your light cord isnt long enough to reach the corners of your deck or patio, you can buy yourself some length by using cord to attach the strand to an eye hook. See the deck railing section above for a visual. You can also buy length with a carabiner.
Now go hang some lights and enjoy your outdoor spaces!
Also Check: How Much Money Do Nail Techs Make
How Big Is The Patio String Lights To Be
Often look out for hanging patio string lights in peoples walking routes. Short, thin strings of exterior lights are hard to see when not switched on.
You dont want to be liable for someone whos wearing shoes! Its hard to tell you a definite height, provided that it depends mostly on the height of the tallest individual on your patio! Yet 9-10 feet is a decent rule of thumb.
How To Hang String Lights Outdoors
Play with your space when hanging string lights outdoors. Here are someoptions for how you can hang string lights outdoors:
To hang string lights from a portico or pergola:
Don’t Miss: How To Hang Shelves Without Nails
Drape Lights On Sturdy Plants Within Your Backyard
Image Source
The lights dont have to be just strings you can decide to put orb lights on some plants, which will give your space a lovely but subtle touch.
Plants like coreopsis, bougainvillea, buddleia, and other similar plants can be an excellent site to place your lights. This will not only lighten up your garden landscape but also bring a heavenly look to your outdoor space.
How Do You Hang Lights Outside Without Nails
hanglights outside without nailshang
Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights. To secure a vertical stretch of lights going straight up or down the wall, face the clips in alternating directions to make the arrangement more secure.
Beside above, how do you hang something on stucco without drilling? Steps
Also to know, how do you hang outdoor lights?
Here’s how to use trees for hanging outdoor lights:
What can I use to hang lights in my room?
How to Hang Christmas Lights in Your Room: Clear packing tape on the cord works well, especially for when the lights climb the wall. If you’re hanging your Christmas lights, Command hooks work wonders.
Recommended Reading: How To Get Dried Nail Polish Out Of Fabric
How To Hang Outdoor String Lights On Stucco
Having a stucco finish on your house can be absolutely beautiful. This means that you dont want to mar or damage it when hanging your string lights from it. There are a few different ways to accomplish this depending on how permanently you want the lights installed.
Believe it or not, a glue gun can be your best friend when youre temporarily hanging lightweight string lights to your home. This is a handy trick around the holidays that holds up better than you might think. All it really calls for is to add hot glue to the cord and hold it in place for about 30 seconds to dry. Instead of doing it in a long strip, its best to add a spot of glue around every 18 inches.
For a more permanent solution, pull out mounting clips and a caulk gun. On each clip, add caulk in portions about the size of a quarter. Once again, youll want to hold it in place for a bit to allow it to set.
Can You Hang Outdoor Lights On Vinyl Siding
Vinyl siding is a bit more resilient when it comes to adhesive, so you can use all of the options Ive presented. In fact, a fantastic no-drill vinyl siding hanger can be found here for cheap!
Vinyl siding also has the advantage of coming in pieces, which is beneficial if you do end up damaging one.
Recommended Reading: What Kind Of Nails To Use For Cedar Siding
Looping The Lights Around A Deck
If you have an outdoor deck space in your backyard, it can be another great space to hang lights, especially if the deck is where the gathering happens! Take the lights and move them around the top railings of the deck. Use a staple gun or some painters tape on the underside of the deck to keep the lights in place. Make sure to wind the lights around to cover any excess tape or staples.
Once the lights have been secured, add the lightbulbs and make sure youve left enough cord to reach the extension outlet. Then youve got a lighted deck that will add to your backyard ambiance.
Make Sure The Lights Are Energy Efficient
If you are having a lot of gatherings in the backyard, or keep the backyard lights on to illuminate the area, then youll want to make sure the lights are working for you. Using LED lights or other energy-efficient bulbs can save you both money and power in the long run.
Additionally, most LED lights are durable enough to withstand significant use and the elements. Plus, the brightness level remains the same as non-LED lights. For lights that are going to last for a long time, make sure to use some LEDs.
Don’t Miss: How To Soak Off Dip Nails
Rough Concrete And Brick Walls
Using a hot glue gun is a great way to hang string lights without nails to almost any surface imaginable.
Now, keep in mind this option is a little more permanent and the lights are harder to move around once you commit to where you glue them.
However, this option will like work the best on flat rough surfaces like porous concrete where there is nowhere to attach a zip tie or a way stick an adhesive backed hook.
What are Hot Glue Guns?
If youre not familiar, hot glue guns heat up and extrude glue through a metal nozzle. The glue quickly cools down and hardens, adhering items to one another.
There are hot glue guns that are rated for outdoor use which is perfect for this application. You can use this option for either bulbless or bulbed string lights. In either case, youll give the gun 5 to 10 minutes to heat up.
Hold the lights how you want them to look and apply a little bit of glue to the string, pressing it firmly against the surface you want it to stick to.
If you have bulbed string lights, avoid getting glue on the lights so you dont end up with foggy bulbs.
Use as many or as few applications of hot glue along the string of lights for your desired outcome.
Unscrew the Bulbs First
If youre using large-bulbed string lights, you might wind up unscrewing the bulbs first.
You can then hot glue the base or the T-connection of the light to the wall. With the bulbs unscrewed, youre ensuring that you dont fog up the glass.
How To Hang String Lights In The Backyard Without Trees
It is a common thing to hang outdoor string lights on trees in the backyard. However, if your backyard has no trees, then you will need to look for alternative ways on how to hang string lights in the backyard without trees.
Here are some tips on how to hang string lights in the backyard without trees.
Read Also: How To Nail Shingles On Roof
How To Hang Fairy Lights Without Nails
Bryony Hayburn
You may have decided that an aspect of your house needs illumination this may be the living room, the hallway, maybe even a bedroom but dont want to place unsightly holes in your wall due to the use of nails. Luckily there are a number of alternative ways to hang or display fairy lights.
