Tuesday, February 27, 2024
HomeExclusiveWhat Size Nails For Vinyl Siding

What Size Nails For Vinyl Siding

Can You Use Galvanized Nails On Pressure Treated Wood

How to Select Siding Nails

You can use galvanized nails in pressure-treated wood. There are even types of galvanized nails specially approved for use on high-level treated woods like ACQ wood. ACQ or alkaline copper quaternary wood is used for high-exposure woods like marine pilings or electricity poles. To keep up with that level of exposure, you need a galvanized or stainless steel nail.

Importance Of Proper Nailing For Vinyl Siding

Vinyl siding is made of plastics which is different than other sidings like wood siding or aluminum siding. This is why precise nailing is very necessary otherwise, it can break easily.

Also, when installing, you have to keep in mind that vinyl siding can crack it up in the change of weather. If you do not save enough space between sidings, things can go wrong. The purpose of installing siding might not work out.

Proper nailing of vinyl siding can be more durable and attractive cladding for homes. Though it is a bit costly, it will protect your house for a long time if you can install it properly.

Vinyl Siding Installation: Materials And Tools

While you can expect differences among manufacturers, siding systems generally include 12-foot lengths of siding, window/door trim channel, J-channel, utility channel, corner moldings, and metal starter strips. In addition, vented and unvented soffits, as well as fascia covers, are available.

The siding must be installed over a flat surface, so unless you’re siding a new home, or have removed the old lap siding, you’ll need to line the wall with sheets of rigid-foam board, usually 1/2-inch thick. While rigid foam offers some insulation, its primary function is to provide a flat nailing surface. Both the rigid foam and siding can be nailed in place with galvanized shingle nails.

Vinyl siding comes in several styles and in a variety of colors. We chose a Dutch lap style, which has the look of tongue-and-groove car siding, because of its distinctive profile.

All vinyl siding and vinyl soffit and fascia can be cut with tin snips, a circular saw with a plywood blade, or by scoring it with a knife and breaking it.

You May Like: How Much Money Do Nail Techs Make A Year

The Best Nails For Wood Siding

The best nails to use for installing wood siding are called siding nails. Siding nails have a few common characteristics that set them apart from regular nails. Siding nails have a rough texture along their shaft, a thin body overall, and a small head at the top.

The rough, ribbed texture on the nails shaft is the essential feature of an effective siding nail. This ribbing locks the nails into the wood, firmly securing it to the frame. Even better, these ribs will keep the nail from coming loose and popping out after a few years of being exposed to the elements.

The other characteristics of a siding nail have to do with its shape. The body of the siding nail is easy to nail in and causes minimal structural damage to the wood. The small heads blend in with the framing, giving it a uniform appearance. Both shape factors are opposed to the traditional, regular nail with a broader body and head. This wider body can split the wood, and the head is very visible, even from a distance.

Frequently, siding nails come in a box of loose nails and are installed using a hammer. The boxes of siding nails are usually measured by weight in pounds. So, the typical options you will see are either a one-pound box or a five-pound box. You can find these boxes at your local hardware store or on an online marketplace. Here is an example from Amazon:

Capping A Corner Post

  • Corner posts on homes with a second-story overhang need to be capped by making the cuts shown . Fold the flaps created over each other as indicated.
  • Drill a 1/8 hole in the center, through both layers of vinyl, and install a pop rivet to hold them in place. Cut a notch in both layers to allow clearance for the corner.

Figure 29.

Don’t Miss: How To Remove Contact Lenses With Nails

How Many Siding Nails Do I Need


Simply so, how many nails do I need for vinyl siding?

Vinyl siding is installed by nailing it to the building. A nail should be placed about every 12 inches, following the manufacturer’s instructions of course. You will need about 2/3 of a pound of nails per square of siding being installed. Be sure to use a galvanized vinyl siding rated nail to prevent rusting.

Likewise, what nails do you use for siding? Use electro, or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8 and a nail head of 3/8 or larger. The nails should penetrate 3/4 into a solid wood base.

Furthermore, how many nails do I need?

The rule of thumb with nails 2 points if you get the pun is that you should choose a nail that is three times as long as the thickness of the material you are fastening. If you want to hold 1/2″ drywall to a stud wall, the length of the nails should be at least 1 1/2″.

How do I calculate how much siding I need?

To find the number of squares of siding needed for an installation, measure each walls width and height in feet. Multiply the width and height to get the area of the wall in square feet. Divide the square footage by 100 to get the number of squares needed for the wall.

What Size Nails Do You Use For Siding

Nail Lengthyou shouldnailsnailssidingnailyousiding

. Hereof, what size nails do you use for vinyl siding?

Use electro, or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8â³ and a nail head of 3/8â³ or larger. The nails should penetrate 3/4â³ into a solid wood base.

One may also ask, can you use finish nails for siding? The answer is, yes. Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. While it’s recommended to always use a siding nail gun for siding installation, in a pinch, you may be able to use a framing nailer instead.

Besides, how long of a nail should I use for vinyl siding?

Most contractors agree that nails used in siding projects should measure at least 1 ½ inches longâor up to 2 ½ inches if you’re installing backerboard with the siding. Nail heads require a 5/16 inches minimum in diameter.

How do you nail down siding?

Start nailing vertical siding and trim pieces in the top of the uppermost slots to hold them in position. Place all other nails in the center of the slots. Space nails a maximum of 16 inches apart for horizontal siding panels, every 12 inches for vertical siding panels, and 6 to 12 inches for accessories.

Don’t Miss: Removing Kiss Impress Nails

Why Are Galvanized Nails Important

Galvanization is a process by which a coat of zinc is added to another metal. The addition of a layer of zinc, which is another more resistant type of metal, works to protect the nail from the elements. Galvanized nails have a longer lifespan since they will take much longer to rust than non-galvanized nails. If you want to avoid having rusty nails completely, you should explore stainless-steel nails as an option.

What Is Vinyl Siding

Kaycan Vinyl Siding Installation Tips: Nailing

During the first half of the 20th century, constructors only used wood and aluminum sidings to cover the parts of houses, buildings, and warehouses. That was a way to protect them from harsh weather conditions.

The exterior construction and siding industry took a big step forward in the 1950s. In that period, Crane Plastics in Columbus, Ohio, invented vinyl siding and launched the new idea globally.

In essence, vinyl siding mainly consists of a modern material, PVC . On average, 80% of it is PVC, and the other 20% are other ingredients that improve color, shine, durability, and versatility.

Two PVC layers make the vinyl sidings advanced and superior. The first one is in charge of bad weather conditions and impact protection. It has a 10% of titanium to make it stronger.

The second layer is the substrate layer with limestone. It makes the vinyl cheap as it reduces the price for making PVC and helps produce flexible material.

Read Also: What’s The Best Polygel Nail Kit

What Nails Do I Use For Lp Smartside

Nailing Requirements Using a nail gun makes quick work of installing LP SmartSide products. Youll want to use a minimum of. 113-inch shank diameter hot-dipped galvanized box-style nails with a minimum of 0.27-inch head diameter. The nails should be long enough to penetrate the structural framing by at least one inch.

Installing Vinyl Siding With Nails Vs Staples

Nails versus staples is an age-old question in the vernacular of construction work. Depending on who you may talk to, there will be differing opinions about which attachment method will be easier or less time consuming. Certainly, either way may be better or worse depending on the situation, but there is one way that would be applicable in your situation.

Don’t Miss: Best Polygel Brand

Can You Use Brad Nails For Siding

Nail Gun for Siding A pneumatic nail gun should be used for siding installation, especially for harder fiber cement siding. Choose a nail gun that will accept siding nails. You cannot use a brad gun for installing siding because the brads leave two holes for each brad and do not hold up as well as siding nails.

Vinyl Siding Installation Step #: Dealing With Obstructions


If your home has a , it’s likely to be suspended from a wall and covering the bottom of the existing siding. In this case, you’ll need to maintain the starter-strip height on both sides of the deck and trim the siding to fit above the deck.

Begin by installing the first row of siding on both sides of the deck. To provide a common reference point, measure up 8 inches from the top of this row and stretch a string line across the deck. Then, trim around the door leading onto the deck. Door and window trim that is about 1 1/4-inches deep will accommodate 1/2-inch insulation board as well as the 1/2-inch siding. Finally, measure the distance from the first row to the deck top and cut the siding to fit over the deck.

To secure this trimmed length, nail J-channel along the top of the deck, backed by a strip of 1/2-inch plywood.

Also Check: How To Hang Canvas Art Without Nails

Proper Type Of Nails For Vinyl Siding

I have a conventional 2 story home that I plan to have vinyl siding installed on. I plan on using a 1 Foam insulated sheathing under it. My question is: what type and size nail is best for this job. Aluminum nails bend too easily, so thats out. Will Galvanized be OK or should I opt for a galvanized hot dipped instead? What about stainless steel? Your comments appreciated.

  • |#2

    1 3/4″” roofers. Center the nails in the slots and dont nail em tight or you’ll get the siding to look like a roller coaster. Be consistant in your nailing. I usually nail every foot and a half or less. HAve the seams overlap so when you look down the side of the house you walk along most you dont see the butt ends. If your concerned about insulation ….besides the 1″ foam you can also use “slip in” foam behind each panel which I highly reccomend. Reason being is it makes each panel more solid besides the insulating factor, HAve fun tin man.

    BE well

  • Galvies will work fine for the vinyl, but if you are putting up any aluminum trim make sure you use aluminum nails.

    Do not try this at home!

    I am a trained professional!

  • |#6

    Galvanized nails and aluminum ANYTHING don’t mix.

    When two dissimilar metals are together, and ANY kind of moisture is introduced, you get corrosion. The corrosion is caused by a process caused electrolysis, andit WILL eat up the metal.

    Humidity, and moisture in the air are enough to eat at the metals and cause a problem.

    Just a thought…James DuHamel

  • Do Command Strips Work On Vinyl Siding

    To what surfaces will Command Products stick? Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard. Command Outdoor Products can also be used on smooth, sealed and finished surfaces including vinyl siding and fences, doors, windows, decks, gutters and trim.

    Recommended Reading: How Do You Get Dip Nails Off

    Leave Some Room For Heat Expansion

    Gently rippling waves may be nice in a reflecting pond or a lake, but theyre no good for the side of your home. Siding that buckles and bulges isnt just unsightly, it makes you more vulnerable to moisture intrusion, mold, and rot as well.

    While there are a lot of reasons siding may start buckling, one of the easiest to avoid is improper nailing. Vinyl siding thats nailed on too tight doesnt leave room for the materials to expand and contract, and that causes ripples to form come summertime. For the best results, leave at least 1/16 inch between the nail head and the siding to give it some room to grow.

    Additionally, unless you have to make an emergency repair, its best to begin a siding project in spring or fall, when the weather is milder. That way, your siding wont be slightly expanded or contracted .

    Vinyl Siding Installation Step #1: Dealing With Obstructions

    Vinyl siding nailer with coil roofing nails

    To side under a faucet, remove the two mounting screws and pull the faucet out from the wall. If yours won’t pull out, check to see if you can shift the pipe that feeds it.

    Behind the faucet mounting plate, install 1/2-inch plywood in place of insulation board. Then, notch the siding from the top and slide it under the faucet. If the faucet falls in the center of the siding, create a lap joint and slide the notched lengths under the faucet from the sides.

    You May Like: How To Get Gel Nail Polish Out Of Clothes

    Can You Use Galvanized Nails In Untreated Wood

    You can definitely use galvanized nails on untreated wood. Untreated wood is more prone to water and element damage, so having a more resistant nail is really beneficial. Unless the object that the wood has made is in an indoor, relatively climate-controlled environment, galvanized nails will always be better.

    Choose Your Nail Wisely

    Galvanized roofing nails are the best choice for vinyl siding. The electro-plated nails are easier to handle and work with, but they are more likely to rust.

    You need to choose aluminum, galvanized steel, corrosion-resistant nails, staples, or screws for installing vinyl siding. Aluminum trim pieces require aluminum or stainless steel fasteners.

    You May Like: How To Remove Contact Lenses With Nails

    How Long Will Non

    Non-galvanized nails lack a coat of zinc that protects them from exposure that results in rust. Treated lumbers are usually used in outdoor projects like decks or fences. So, if you use non-galvanized nails in treated lumber, its not a matter of if they will rust its just a matter of when. Many factors decide how quickly the nails will be ruined, like moisture and temperature. Depending on your environment, exposed non-galvanized nails can last less than two years, even in treated lumber.

    How To Nail Vinyl Siding


    Siding is for the protection of the walls of your house. Vinyl siding can be an excellent choice. Unlike other sidings like wood sidings and aluminum sidings, vinyl sidings have plastic, which is more long-lasting than others.

    Though vinyl siding is costlier than other sidings, it will be more durable if you can install it properly by nailing it perfectly. You have to be precise in nailing these plastic sidings. Any improper step can break or crack your vinyl board.

    Also Check: How To Get Nail Glue Off Your Nails Without Acetone

    Do You Use Nails Or Screws For Siding

    Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding. Aluminum trim pieces require aluminum or stainless steel fasteners. All fasteners must be able to penetrate a minimum of 1 1/4 into nailable material, such as wood sheathing and framing (Fig.

    What Kind Of Nails Do You Use To Put Up Vinyl Siding

    Use aluminum, galvanized steel, or other corrosion-resistant nails, staples, or screws when installing vinyl siding. Aluminum trim pieces require aluminum or stainless steel fasteners. All fasteners must be able to penetrate a minimum of 1 1/4 into nailable material, such as wood sheathing and framing (Fig.

    Also Check: How To Hang Up A Painting Without Nails

    How To Estimate How Much Vinyl Siding Is Needed For A Home

    Vinyl siding is a beautiful and cost-effective material to enhance your homes curb appeal and exterior look.

    The first step to a vinyl siding installation is to estimate and order materials.

    Finding the amount of material needed is a fairly simple process. Vinyl siding is sold by the square, which is equivalent to 100 square feet of material.

    Get Free Project Estimates

    Find Qualified Siding Professionals in Your Area

    To find the number of squares, measure the square footage and divide by 100. Start by measuring the height and width of each wall of the building. Multiply each length and height measurement to find the square footage of each wall, then add them together to find the total square footage.

    Divide the total by 100 to find the number of squares of vinyl siding to order.

    Standard Nail Sizes/nail Measurements

    Tip of the Week: Selecting a Fastener When Installing Vinyl Siding

    The nail size charts below illustrate industry standards for nail sizes and their dimensions. Under nail size, the penny size refers to a standard nail unit. Nails are measured in pennies, believed to be from older times when nails were sold by the penny. At the time, the abbreviation for pennies was d, so nail sizes are described as 2d nails, 3d nails, etc. So a 16 penny nail is also described as a 16d nail, and 8 penny nails are abbreviated as 8 d nails. Pennyweight does not correspond exactly to nail weight, gauge, or other measurements, however for example common 10d nails are 3″ long with a 5/16″ head diameter and a 9 gauge shank.

    Though still in common use, the penny system is considered obsolete, and some international vendors do not use it. The shank diameter and length refer to the shaft part of the nail, called the shank, which is driven into the surface. The head is, of course, the top portion struck to drive the nail into the material.

    Table 1 – Nail Sizes

    Nail Size

    Also Check: How To Make Nail Polish Remover At Home


    Popular Articles